Search results
Results From The WOW.Com Content Network
Available for Windows 7 to 11, or Windows Server from 2008 R2 to 2022; 32/64-bit x86 or 64-bit ARM. SoftPerfect RAM Disk can access memory available to Windows, i.e. on 32-bit systems it is limited to the same 4 GB as the 32-bit Windows itself, otherwise for physical memory beyond 4 GB it must be installed on 64-bit Windows.
DDR2 SDRAM. Double Data Rate 2 Synchronous Dynamic Random-Access Memory (DDR2 SDRAM) is a double data rate (DDR) synchronous dynamic random-access memory (SDRAM) interface. It is a JEDEC standard (JESD79-2); first published in September 2003. [2] DDR2 succeeded the original DDR SDRAM specification, and was itself succeeded by DDR3 SDRAM in 2007.
In today's technology, random-access memory takes the form of integrated circuit (IC) chips with MOS (metal–oxide–semiconductor) memory cells. RAM is normally associated with volatile types of memory where stored information is lost if power is removed.
A light-weight Linux distribution is one that uses lower memory and/or has less processor-speed requirements than a more "feature-rich" Linux distribution. The lower demands on hardware ideally result in a more responsive machine, and/or allow devices with fewer system resources (e.g. older or embedded hardware) to be used productively.
2 GB limit. The 2 GB limit refers to a physical memory barrier for a process running on a 32-bit operating system, which can only use a maximum of 2 GB of memory. [ 1 ] The problem mainly affects 32-bit versions of operating systems like Microsoft Windows and Linux, although some variants of the latter can overcome this barrier. [ 2 ]
Get AOL Mail for FREE! Manage your email like never before with travel, photo & document views. Personalize your inbox with themes & tabs. You've Got Mail!
One 64 GiB DDR5-4800 ECC 1.1 V RDIMM. Registered, or buffered, memory is not the same as ECC; the technologies perform different functions. It is usual for memory used in servers to be both registered, to allow many memory modules to be used without electrical problems, and ECC, for data integrity.
A power-on self-test (POST) is a process performed by firmware or software routines immediately after a computer or other digital electronic device is powered on. [1] POST processes may set the initial state of the device from firmware and detect if any hardware components are non-functional.