Search results
Results From The WOW.Com Content Network
From 1952 to 1954 two compression ratios were specified, 6.8:1 with synchromesh (manual) transmission, and 7.7:1 with Hydramatic automatic transmission. [4] The engine had a remarkably low idle speed of 450 rpm with standard transmission and 375 rpm (while in drive) for the automatic; [ 5 ] a modern engine is usually tuned to a minimum 600-700 rpm.
The first Czechoslovakian 1’D2’t-h2 (2-8-4) tank locomotive was derived from the CSD Class 455.1 1’D-h2 (2-8-0) tender locomotive, with water tanks, a coal bunker and a trailing bogie added. Apart from changing the drive from the second to the third coupled axle and increasing the superheating surface of the boiler, these handsome tank ...
A 2-8-8-4 steam locomotive, under the Whyte notation, has two leading wheels, two sets of eight driving wheels, and a four-wheel trailing truck. The type was generally named the Yellowstone, a name given it by the first owner, the Northern Pacific Railway, whose lines ran near Yellowstone National Park. Seventy-two Yellowstone-type locomotives ...
The 366 cu in (6.0 L) big-block V-8 gasoline engine was used in Chevrolet medium duty trucks and school buses. It had a bore and a stroke of 3.935 in × 3.76 in (99.9 mm × 95.5 mm). This engine was made from the 1960s until 2004.The 366 used 4 rings on the pistons, as it was designed from the very beginning as a truck engine.
Ford Modular engine. The Ford small-block (aka Windsor V8) is a series of 90° overhead valve small-block V8 automobile engines manufactured by the Ford Motor Company from July 1961 to December 2000. Designed as a successor to the Ford Y-block engine, it was first installed in the 1962 model year Ford Fairlane and Mercury Meteor.
The High Value engine family from General Motors is a group of cam-in-block or overhead valve V6 engines.These engines feature cast iron blocks and aluminum heads, and use the same 60° vee bank as the 60° V6 family they are based on, but the new 99 mm (3.90 in) bore required offsetting the bores by 1.5 mm (0.059 in) away from the engine center line.
Chronology. Successor. Cummins X10. The Cummins L-series engine is a straight-six diesel engine designed and produced by Cummins. It displaces 8.9 litres (543.1 cu in ), and began production in 1982 as the L10 at the Jamestown Engine Plant in Jamestown, New York. After lengthening its stroke from 136 to 147 mm, its displacement was enlarged to ...
Jackson told the New York Times that “the dressing bulked up a bit because you need a bit of absorbent. You don’t want to be walking around with bloody gauze on his ear.”. Donald Trump ...