Search results
Results From The WOW.Com Content Network
Let's run the Wireless set up wizard: Use the printer's built-in Wireless Setup Wizard to walk you through finding your network name and entering the network password to connect the printer to your wireless network. Press the Power button to turn on the printer, if it is not already turned on. On the printer control panel, touch the Wireless ...
2. Click Install MFL-Pro Suite. 3. After reading and accepting the License Agreement (s), click Yes if you agree to the terms. 4. Choose Wireless Network Connection, and then click Next. 5. Select Change the Firewall port settings to enable network connection with the installation. (Recommended) and then click Next.
Once the wireless settings are configured the Wi-Fi LED will remain lit. - If the Wi-Fi LED is lit, place a check next to Checked and confirmed and then click Next. Go to step 17. - If the Wi-Fi LED continues to flash, the wireless settings cannot be configured. Click Back to try again. We recommend wireless setup using a USB cable temporarily.
Start the wireless Setup Wizard. a. Press Settings on the machine. b. Press or to display Network and then press OK. c. Press or to display WLAN and then press OK. d. Press or to display Setup Wizard and then press OK. 4.
Click Install Printer Driver. c. Choose Yes to check for a newer version of the software (requires Internet connection), and then click Continue. Go to step 2. 2. After reading and accepting the License Agreement, click Yes if you agree to the terms. 3. Choose Wireless Network Connection, and then click Next. 4.
Locate your SSID (Network Name) and Network Security Key (Password). Place a check next to Checked and confirmed and then click Next. Go to step e. e. The installer will display instructions for entering the network settings on your machine. Follow the onscreen instructions and then click Next. Go to step g.
Wait for about 60 seconds. Plug the printer back in and turn it on. 2. Reset Network Settings. Restore the printer's network settings to default. Go to the printer's control panel and navigate to Settings > Network Setup or Wireless Settings. Select Restore Network Settings. 3. Check the Wireless Button and LED.
Configure Using the Computer's Wireless Connection or Without a Cable. a. Choose one of the following connection methods and then click Next: - Use WPS or AOSS: Go to step b. - Do no use WPS or AOSS: Go to step c. b. For WPS or AOSS setup instructions, click here. Once the machine is connected wirelessly, click Next. A WLAN Report will print.
3. Press ON for WLAN Enable. 4. Under the same Network setting screen, press Setup Wizard. - The available Network Name (SSID) will be displayed. - Before you continue to step 5, make sure that you met all the Requirements for the wireless network connection. 5. Select your Network Name (SSID) and then touch the OK key. 6.
Wireless Device Setup Wizard. a. Locate your SSID (Network Name) and Network Security Key (Password). Place a check next to Checked and confirmed and then click Next. If you want to configure the wireless connection using WPS, click Use WPS. Follow the onscreen instructions and then click Next. Go to step c.