Search results
Results From The WOW.Com Content Network
ACPI. Advanced Configuration and Power Interface ( ACPI) is an open standard that operating systems can use to discover and configure computer hardware components, to perform power management (e.g. putting unused hardware components to sleep), auto configuration (e.g. Plug and Play and hot swapping ), and status monitoring.
Radio frequency communication (RFCOMM) The Bluetooth protocol RFCOMM is a simple set of transport protocols, made on top of the L2CAP protocol, providing emulated RS-232 serial ports (up to sixty simultaneous connections to a Bluetooth device at a time). The protocol is based on the ETSI standard TS 07.10. RFCOMM is sometimes called serial port ...
Bluetooth is a short-range wireless technology standard that is used for exchanging data between fixed and mobile devices over short distances and building personal area networks (PANs). In the most widely used mode, transmission power is limited to 2.5 milliwatts, giving it a very short range of up to 10 metres (33 ft).
Domain. Power management. Advanced power management ( APM) is a technical standard for power management developed by Intel and Microsoft and released in 1992 [1] which enables an operating system running an IBM-compatible personal computer to work with the BIOS (part of the computer's firmware) to achieve power management .
Pairing, sometimes known as bonding, is a process used in computer networking that helps set up an initial linkage between computing devices to allow communications between them. The most common example is used in Bluetooth , where the pairing process is used to link devices like a Bluetooth headset with a mobile phone .
For the Bluetooth Low Energy stack, according to Bluetooth 4.0 a special set of profiles applies. A host Operating System can expose a basic set of profiles (namely OBEX, HID and Audio Sink) and manufacturers can add additional profiles to its driver and stack to enhance what their Bluetooth device can do. Devices such as mobile phones can ...
powercfg. powercfg ( executable name powercfg.exe) is a command-line utility that is used from an elevated Windows Command Prompt to control all configurable power system settings, including hardware-specific configurations that are not configurable through the Control Panel, on a per-user basis. It was first introduced by Microsoft in Windows ...
Wireless power transfer ( WPT ), wireless power transmission, wireless energy transmission ( WET ), or electromagnetic power transfer is the transmission of electrical energy without wires as a physical link. In a wireless power transmission system, an electrically powered transmitter device generates a time-varying electromagnetic field that ...